史上最强，支持 Debian 12 raid 0 Ubuntu 24.04（测试中）；512MB 内存安装 AlmaLinux/RockyLinux；CentOS 9 Fedora 39 AlpineLinux Kali Linux Windows 重装程序功能更新、bug反馈贴（长期更新）

@leitbogioro #209

原来还有这么多讲究，谢谢大佬科普！
可以看出来真的很负责，吃几个鸡腿当夜宵吧，明天顺便去仓库点个star。

关于网络掩码，我好像理解了一点…就是同一个网段被当成直连的，平时可以互相通信，只不过安装程序很严格。
家用路由器的局域网里路由跟踪192.168.1.2/24，总是一跳就到达。
而路由器公网IP可能是1.1.1.2/32，这时候路由跟踪1.1.1.3，就会发现得经过1.1.1.1网关。

cloudcone的网关，配置文件写的和路由跟踪显示的不是同一个IP，我好奇他们咋做到的，也不知道脚本是否会被影响，我那会在cc上执行top看见一大堆不认识的进程，还以为中毒了（实际上就是自带的），吓得赶紧重装，结果发现某个脚本的开不了机，还得用官方的镜像。

（不是您的，我几乎没dd过系统）

至于死亡红框，要不向Debian提交代码之类的问一下？

我回头让GPT再讲一讲网络知识，我有些地方也是一知半解，啊哈哈。

还要说什么来着，忘了，慢慢交流~

@Just纱世里 #211 其实没啥，帮debian擦腚的同时学到了一点知识而已，感谢支持。

@leitbogioro #202 发布于7/6/2023, 9:41:57 PM
@Not-Oles #199 I think you should use default port(probably 22), default password(LeitboGi0ro), recommended ssh client(Xshell or Putty) to reinstall and connect to the server again, if it still failed, don't attempt to mount it and insert any files, tell me the IP, root password by email, I try to connect it.

Thanks for this good advice!

I reinstalled the dedicated bare metal test server with Hetzner's default CentOS Stream. I will try using your script to change the CentOS Stream to Debian 12.

Does this command look okay?

bash /root/InstallNET.sh \
  -debian 12 \
  -mirror "http://ftp.de.debian.org/debian/" \
  -setdisk "all" \
  -raid "1" \
  --ip-addr "138.201.xxx.xxx" \
  --ip-mask "255.255.255.192" \
  --ip-gate "138.201.xxx.xxx" \
  --ip6-addr "2a01:4f8:xxxx:xxxx::2" \
  --ip6-mask "64" \
  --ip6-gate "fe80::1"

If it doesn't work, I will email you IP info.

All this is lots of fun for me! Thank you so much!

@leitbogioro #202 发布于7/6/2023, 9:41:57 PM

Email sent.

@Not-Oles #214 @Not-Oles #213

bash InstallNET.sh -debian 12 --network "static" -raid "0" -mirror "http://ftp.de.debian.org/debian/"

@Not-Oles #214 Could you reset the server, including reinstall the system which provided by them and accept a full root permission ssh login account for me by email? I will make an investigation on the original system.

@leitbogioro #216

Okay, resetting the server now. Will put your key in /root/.ssh/authorized_keys. Will post here when ready.

@leitbogioro #216

New CentOS Stream 9 install completed. This is the Hetzner default install.

I added your ssh key to the root account. I did nothing else.

Login info sent by email.

If you need anything more, please ask. Thank you!

@Not-Oles #218 Okay, I'm on the subway, when go back to home, I'll start the investigation soon.

如何让安装完的系统不带swap分区？