史上最强，支持 Debian 12 raid 0 Ubuntu 24.04（测试中）；512MB 内存安装 AlmaLinux/RockyLinux；CentOS 9 Fedora 39 AlpineLinux Kali Linux Windows 重装程序功能更新、bug反馈贴（长期更新）

@leitbogioro #135
好的，我看看这个

@Not-Oles #123 I have decided to use VMware virtual machine as the testing environment.

@leitbogioro #138 发布于6/20/2023, 5:01:32 PM，编辑于6/20/2023, 5:05:05 PM
@Not-Oles #121 Hello sir, here are the parts of raid 0 partition recipe in my code:

[[ "$setRaid" == "0" ]] && FormatDisk=`echo -e "d-i partman-md/confirm boolean true d-i partman-md/confirm_nooverwrite boolean true d-i partman-basicfilesystems/no_swap boolean false d-i partman/mount_style select label d-i partman-auto/method string raid d-i partman-auto/disk string "$IncDisk" /dev/sdb d-i partman-auto-raid/recipe string \ 1 2 0 ext4 /boot "$IncDisk"1#/dev/sdb1 . \ 0 2 0 ext4 / "$IncDisk"2#/dev/sdb2 . d-i partman-auto/expert_recipe string multiraid :: \ 400 100 400 raid \\$bootable{ } \\$primary{ } method{ raid } . \ 100 200 -1 raid \\$primary{ } method{ raid } . d-i mdadm/boot_degraded boolean true"`

The code is saved as a parameter by printing with command "echo", to read it in markdown code mode is a little difficult, the screen shot of formated code is here:

Yep! Seems like what I read previously from your script. Thank you for sending me a message with precise details. ❤️

@leitbogioro #139 发布于6/20/2023, 5:13:40 PM
@Not-Oles #119 The obvious error is that the part of assigning target disks:

d-i partman-auto/disk string /dev/sda /dev/sdb

"sda" or "sdb" devices are corresponded to SCSI interface hdds, the NVME interface ssds' names of your server are nvme0n1 and nvme1n1, so I need to fix this bug first to make sure the program should find the correct raid 0 disk devices.

Yes, that looks right to me. 😃

@leitbogioro #140 发布于6/20/2023, 5:50:05 PM
@Not-Oles #112 Sir, could you please give me a root permission? I found that I can't use vim, and can't use "apt install vim -y" to install it.

Hi again!

root@fsn ~ # date -u
Wed Jun 21 04:58:11 AM UTC 2023
root@fsn ~ # ls -l /etc/group
-rw-r--r-- 1 root root 839 Jun 19 00:46 /etc/group
root@fsn ~ # cat /etc/group | grep sudo
sudo:x:27:notoles,chleitbo
root@fsn ~ # ls -l /home/chleitbo/password
-rw------- 1 chleitbo chleitbo 17 Jun 19 00:46 /home/chleitbo/password
root@fsn ~ # 

If you need anything else, just ask! Thank you for working on the server!

@leitbogioro #142 发布于6/20/2023, 8:53:52 PM
@Not-Oles #123 I have decided to use VMware virtual machine as the testing environment.

Thanks for telling me. I haven't used VMware very much.

Note that qemu and libvirt and LXC already are installed on the server. I think, if you use qemu or libvirt you might need to add yourself to the kvm group. If you use LXC you might need to add yourself to /etc/sub[gu]id.

My only concern about VMware is that I am unsure whether it is open source. You can use it whether it is open source or not, but I do prefer open source.

Thanks again! 😃

现开启了一个参数：--nomemcheck ，输入后即跳过内存容量检测，你可以在任何内存的机器上尝试安装目标系统，即使能在当前系统成功下载并打包网络安装启动内核，但不保证重启后能安装成功。

支持

好用，萌咔的脚本不支持hy，用这个搞定了。。。

@陈平安 #149 感谢支持，很多商家模板系统自带的静态网络掩码设置有很大问题，导致重启后Debian installer寻找的ip地址范围过窄，导致网关不可达（unreachable gateway），如果按原样获取，不根据主ip和网关ip加以任何计算和修正，或者是默认模板基于红帽系，或机器主板固件为UEFI，如果用萌卡的脚步重装都会出问题