I believe my initial travel through the requests is attempted. You can see some details at https://fossvps.org/list.html.
The next step is to update the fossvps.org website. Then I need to make more VPSes. Finally I will be able to give away more VPSes to the gentlemen whose requests have been accepted. It might be a day or two. . . . 😃
If your request says "Pending," maybe you might need to add more to your request?
@Not-Oles#183
I will document the entire process in detail. In my request (Post 102), I mentioned wanting to use Debian 13. Since you provided an Ubuntu system, I decided to reinstall the system to Debian myself. I used this GitHub project for the reinstallation (https://github.com/bin456789/reinstall). Because reinstalling the system takes some time, I went to sleep after executing the command. I hoped to wake up to a freshly installed system, but the bad news is that upon waking, I couldn't even SSH into the VPS you provided.
I checked the GitHub issues and suspected the problem might be with the network card configuration. After establishing an SSH connection, I used Cloudflare's Warp service to access sites like GitHub that only allow IPv4 access. Since the system reinstallation code automatically reads and configures the network card, I suspect it attempted to bind the Warp exit IP to the network card, causing the error. Until you @ me, I was persistently trying to resolve this complex issue on my own—even attempting the system reinstallation on my own IPv6-only VPS. I didn't contact you immediately upon encountering the problem because I had recently inconvenienced you due to an incorrect SSH login username. I hoped to resolve this issue independently rather than trouble you again. Additionally, since I couldn't successfully SSH into the VPS you provided, I was unaware the server was experiencing persistently high CPU usage. I sincerely apologize for the inconvenience caused by my missteps and hope my explanation above is clear and straightforward. I'm sharing this sequence of events so you won't think I'm misusing your server. I only intended to reinstall the system (which failed).
I need your assistance to reinstall the server using the SSH public key. I can assure you that this time I will absolutely use the correct username for the SSH connection. Thank you very much for your help.
Both of the comment fields seem like very strange @gmail addresses.
The key in comment 175 renders in a way that I can not see where the key ends and the comment begins. Maybe the space in between the key and the comment field is replaced with a newline. Maybe it is just the website rendering.
Do you really have those gmail accounts? Can you send me emails from those accounts?
I will reset your VPS with the key you provided in post 185.
I will post here when the VPS is reset.
It is okay to break your VPS because you tried to do something fun and interesting. I am here to try to help when you break your VPS! I hope you can break your VPS many times because of new, very fun adventures!
Congratulations on your excellent sense of humor!
I believe you might be teasing me by deliberately making mistakes or obfuscations with your ssh key.
The status of your request has changed from Assigned to Pending.
Maybe I am wrong. I make a lot of mistakes.
Best wishes and kindest regards,
Tom
各位 Nodeseekers，大家好！
我相信我已经初步尝试过所有请求了。您可以访问 https://fossvps.org/list.html 查看详细信息。
下一步是更新 fossvps.org 网站。然后我需要创建更多 VPS。最后，我就可以向那些请求被接受的各位赠送更多 VPS 了。这可能需要一两天时间…… 😃
如果您的请求显示“待处理”，也许您需要添加更多请求？
祝大家度过美好的一天！
祝一切顺利！
汤姆
Hello Nodeseekers,
I believe my initial travel through the requests is attempted. You can see some details at https://fossvps.org/list.html.
The next step is to update the fossvps.org website. Then I need to make more VPSes. Finally I will be able to give away more VPSes to the gentlemen whose requests have been accepted. It might be a day or two. . . . 😃
If your request says "Pending," maybe you might need to add more to your request?
I hope all of you enjoy a most excellent day!
Best wishes!
Tom
@Silent123
您好！
您的 VPS 从昨天开始 CPU 占用率就一直高达 100%，所以我把它关掉了。
您知道可能发生了什么吗？
祝一切顺利！
汤姆
Hello!
Your VPS has been running 100% CPU since yesterday, so I shut it down.
Any idea what might be happening?
Best wishes!
Tom
@Not-Oles #181 Why? I have set it up according to your request, why do you say I am playing tricks on you?
@Not-Oles #183
I will document the entire process in detail. In my request (Post 102), I mentioned wanting to use Debian 13. Since you provided an Ubuntu system, I decided to reinstall the system to Debian myself. I used this GitHub project for the reinstallation (https://github.com/bin456789/reinstall). Because reinstalling the system takes some time, I went to sleep after executing the command. I hoped to wake up to a freshly installed system, but the bad news is that upon waking, I couldn't even SSH into the VPS you provided.
I checked the GitHub issues and suspected the problem might be with the network card configuration. After establishing an SSH connection, I used Cloudflare's Warp service to access sites like GitHub that only allow IPv4 access. Since the system reinstallation code automatically reads and configures the network card, I suspect it attempted to bind the Warp exit IP to the network card, causing the error. Until you @ me, I was persistently trying to resolve this complex issue on my own—even attempting the system reinstallation on my own IPv6-only VPS. I didn't contact you immediately upon encountering the problem because I had recently inconvenienced you due to an incorrect SSH login username. I hoped to resolve this issue independently rather than trouble you again. Additionally, since I couldn't successfully SSH into the VPS you provided, I was unaware the server was experiencing persistently high CPU usage. I sincerely apologize for the inconvenience caused by my missteps and hope my explanation above is clear and straightforward. I'm sharing this sequence of events so you won't think I'm misusing your server. I only intended to reinstall the system (which failed).
I need your assistance to reinstall the server using the SSH public key. I can assure you that this time I will absolutely use the correct username for the SSH connection. Thank you very much for your help.
支持
@Not-Oles #178
Thank you so much! I really appreciate it. I'm really looking forward to it, especially the IPv4 connectivity.
@Not-Oles #156
I need a vps to deploy https://github.com/o2sky/oci-start, an oracle cloud api panel
Because the comment field changed between
https://www.nodeseek.com/post-431916-18#175
and
https://www.nodeseek.com/post-431916-18#173
Both of the comment fields seem like very strange @gmail addresses.
The key in comment 175 renders in a way that I can not see where the key ends and the comment begins. Maybe the space in between the key and the comment field is replaced with a newline. Maybe it is just the website rendering.
Do you really have those gmail accounts? Can you send me emails from those accounts?
@Silent123 #185
Thanks for a great story!
I will reset your VPS with the key you provided in post 185.
I will post here when the VPS is reset.
It is okay to break your VPS because you tried to do something fun and interesting. I am here to try to help when you break your VPS! I hope you can break your VPS many times because of new, very fun adventures!
Best wishes always!
Tom