You are receiving this email because your VPS/SC2 hosted in the Los Angeles DC may be affected by the ongoing network connectivity issues following our LA colocation migration.
Our Engineering Team has identified a temporary workaround designed to improve the network stability of your services while we continue working toward a permanent resolution.
For the latest updates, please visit our Status Page.
Run This Command On Your LA VPS/SC2
This temporary fix consists of a CLI command that can be executed directly from your server's terminal. Please note that this is a temporary solution and will revert to the default network configuration if your server is restarted.
Connect to your server's SSH terminal as root. Next, copy the command below and paste it in, and then press Enter to apply the temporary fix.
@Look #0 好 这就试试 v6 去
之前改的网卡mtu需要改回来么
直接用finalshell就好了，但我的cloudcone还是经常断
@赵云 #2 我看官方说重启就没了
今天经常断
我的VNC都打不开，SSH不改mtu倒是正常了，但是做不了节点
恢复了三台，还有一台离线
我的恰好相反。前两天ipv6和ipv4不能用，修改了mtu之后好了。今天下午直接关机了，连不上
sc2 看着还是不能用，没见过这么垃圾的，几天都没搞好，还不如oneman
你们没收到这个邮件吗
You are receiving this email because your VPS/SC2 hosted in the Los Angeles DC may be affected by the ongoing network connectivity issues following our LA colocation migration.
Our Engineering Team has identified a temporary workaround designed to improve the network stability of your services while we continue working toward a permanent resolution.
For the latest updates, please visit our Status Page.
Run This Command On Your LA VPS/SC2
This temporary fix consists of a CLI command that can be executed directly from your server's terminal. Please note that this is a temporary solution and will revert to the default network configuration if your server is restarted.
Connect to your server's SSH terminal as root. Next, copy the command below and paste it in, and then press Enter to apply the temporary fix.
ip link set dev eth0 mtu 1400