我用这玩意给我的瓦工测单线程，结果单线程750+，比多线程还高(虽然多线程也700+)。本来怀疑测的有问题，结果用iperf3测，更高了 Connecting to host 144, port 5202 Reverse mode, remote host 144 is sending [ 5] local 192.168.1.102 port 59445 connected to 144 port 5202 [ ID] Interval Transfer Bitrate [ 5] 0.00-5.01 sec 350 MBytes 587 Mbits/sec [ 5] 5.01-10.01 sec 522 MBytes 876 Mbits/sec [ 5] 10.01-15.01 sec 475 MBytes 797 Mbits/sec [ 5] 15.01-20.01 sec 523 MBytes 878 Mbits/sec [ 5] 20.01-25.01 sec 502 MBytes 842 Mbits/sec [ 5] 25.01-30.01 sec 522 MBytes 876 Mbits/sec [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-30.15 sec 2.92 GBytes 832 Mbits/sec 17 sender [ 5] 0.00-30.01 sec 2.83 GBytes 809 Mbits/sec receiver iperf Done. gpt说他测的也是单线程 瓦工的美西自带中转吗？附一张之前测的图，延迟可以证明我自己没有中转过
测速点选好点 大体上还是准的
@qwer3648000 #2 用过呀 要更准确些就iperf3
@qwer3648000 #4 woc什么叫瓦工自带中转吗...瓦工不就是线路机吗
@qwer3648000 #6 美西单线程限速是GIA的问题，你如果不是电信应该就没有限速
@qwer3648000 #8 应该是仅美西方向
@nhnhnh000 #1 你用这玩意测过美西吗？
我用这玩意给我的瓦工测单线程，结果单线程750+，比多线程还高(虽然多线程也700+)。本来怀疑测的有问题，结果用iperf3测，更高了
Connecting to host 144, port 5202
Reverse mode, remote host 144 is sending
[ 5] local 192.168.1.102 port 59445 connected to 144 port 5202
[ ID] Interval Transfer Bitrate
[ 5] 0.00-5.01 sec 350 MBytes 587 Mbits/sec
[ 5] 5.01-10.01 sec 522 MBytes 876 Mbits/sec
[ 5] 10.01-15.01 sec 475 MBytes 797 Mbits/sec
[ 5] 15.01-20.01 sec 523 MBytes 878 Mbits/sec
[ 5] 20.01-25.01 sec 502 MBytes 842 Mbits/sec
[ 5] 25.01-30.01 sec 522 MBytes 876 Mbits/sec
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-30.15 sec 2.92 GBytes 832 Mbits/sec 17 sender
[ 5] 0.00-30.01 sec 2.83 GBytes 809 Mbits/sec receiver
iperf Done.
gpt说他测的也是单线程
瓦工的美西自带中转吗？附一张之前测的图，延迟可以证明我自己没有中转过
@AntonyD #5
不是说美西单线程低吗，中转了单线程可以跑满
@AntonyD #7 原来如此，亚太电信限速吗？